University of Hertfordshire

£67.00

Product code:

PHRORESIN

For delivery:

Estimated despatch 16 - 26 Dec 2025

Description

Volume: 500g per bottle

XY Planar Resolution: 0.050 mm

Z Resolution (Layer Height): 30-100um

Property: High hardness and toughness, and resolution. Its light color is suitable for post process, like painting.

Way to Rinse: Clean with alcohol spray with air gun

Compatible Printer: Phrozen 3D Printer Series

Application: General modeling & prototyping

Key Performance:

Viscosity: 67 cps

Proportion: 1.1

Tg: 70 °C

Elongation: 3 %

Break value: 10 MPa

Surface hardness: Shore 76D

I-Zod Impact: 1.44 KJ/m2

Precautions

Suggest to use our resin and printer indoor under ventilated situation.

Avoid exposure to sunlight and indoor luminescence.

Please preserve our resin in closed opaque bottle in avoid of exposure to air.

Do not mix used and non-used resin together.

Please keep the resin away from kids.

Do not dump resin. Please cured resin and treat/recycle it as general plastics garbage.

Safety Rules

Do not eat and swallow the resin. Go to hospital if necessary.

Wear goggles in avoid of eye contact to resin. Wash your eyes by water and go to hospital if necessary.

Resin might cause slight irritation to skin. Wear gloves when handling. Stop using it if allergy occurred.

Resin is with slight odor. We strongly suggest you to use it under ventilated condition.

Suggested safety equipment: gloves, mask, goggles, and lab coat.

Keep resin in room temperature (15 - 35 °C) and dry condition.

Back